Installation, Advice & Supply

Profiles

Standing Seam Metal roofing and Cladding

Single lock standing seam wall cladding system is a traditional technique used for facades and roofing applications. Single lock standing seams may be used vertically as wall cladding.

Double lock standing seam system is a traditional technique applied to roofs.

These systems enable long strips of standing seam panels to be assembled by forming single or double folds on the up stands. Due to the use of profiling and seaming machines for closing the joints, the installation time is greatly reduced, making this a cost-effective metal roofing and wall cladding solution. Concealed clips and fasteners provide a seamless appearance.

Similar profiles- Lysaght Imperial ™

Available in Colorbond, Colorbond Matt, Titanium Zinc, Aluminium, Vestis, Corten, Copper and Brass finishes.

Interlocking Panels

Interlocking panel is utilized for facades. This self-supporting system consists of pre-formed panels and clips that can be laid vertically or horizontally.

These panels are a tongue and groove system with concealed fasteners. The panels are available in multiple shapes and dimensions, providing virtually unlimited design possibilities.

Similar profiles- Lysaght Dominion®, Diversaclad, V25

Available in Colorbond, Colorbond Matt, Titanium Zinc, Aluminium, Vestis, Corten, Copper and Brass finishes.

Flatlock Metal Cladding

Flat lock panel is a wall cladding system that uses overlapped metal panels so that a nearly flat appearance is achieved.

The flat lock panel system is weather resistant, ventilated wall cladding installed over a waterproofing membrane. Flat lock panels offer a simple, yet elegant cladding solution characterized by a longitudinal seam on a horizontal, vertical, or diagonal bias.

The panels are available in multiple shapes and dimensions, providing virtually unlimited design possibilities. The simplicity of the wall cladding system allows for easy installation. Because there is little manual manipulation of the panels in the field, Flat lock panels may be installed in cold weather without fracture

Similar profiles- Adeka, Shingles

Available in Colorbond, Colorbond Matt, Titanium Zinc, Aluminium, Vestis, Corten, Copper and Brass finishes.

Nail Strip Metal Roofing and Cladding

Like standing seam, nail strip panels are ideal for roof or wall applications where thin distinctive ribs and wide trays appeal as this system can be manufactured in an array of widths tailored to suit most projects.

Concealed clips hold each panel into place with the unique lapping system snapping each high rib into place.

Similar profiles- Lysaght Enseam®, Snaplock, Ribbon Tray, Lysaght Longline 305

Available in Colorbond, Colorbond Matt, Titanium Zinc, Aluminium, Vestis, Corten, Copper and Brass finishes.

Aluminium Cassette Panels

Composite panels consisting of two aluminium cover sheets and a plastic core. The superb properties of this material offer architects a whole new range of

Alucobond Plus - Fire Retardant with non-combustible mineral filler
Alucobond A2 - Non-combustible core
ALPOLIC NC - non-combustible material

Solid Non-combustible Aluminium

Alfrex and Mondo clad

*All materials meet strict Australian standards